top of page

The all new TTS-2000 is a hand held/bench mount torque tester with the performance and features of any high end torque testing system. This system is modular, meaning that you can expand your torque range needs as your needs change. No need to buy a new electronic tester for every torque range. The meter will automatically detect the range of the transducer attached and set all calibration data automatically (smart transducers). Ranges available from 5 in-oz to 2000 ft-lb (see transducer section for appropriate range torque transducers). This is the last torque tester you will ever need since it has all the necessary features and modes and will adapt to any torque transducer- we guarantee it!

Purchase the TTS-2000 along with the proper torque testers to cover the ranges of your torque wrenches.

TTS-2000 Series Torque Meter

SKU: TTS-2000
$2,527.19Price
  • TTS-2000

  • Test and calibrate all torque wrenches (includes first peak mode for testing click wrenches)

    Accuracy: +/- .25% or better from 10-100% of range (with bench mount transducers) +/1 one torque increment.

    Extremely fast 10,000 sample per second sampling rate means you can test pulse tools

    Dual processor system for top performance.

    Quickly set target torque with visual and audible prompting of pass/fail conditions

    Test your torque wrenches in-house and save money

    Time Stamp

    Extensive serial command set for two-way control from a computer or controller (using LabViewTM or Hyperterminal)

    Analog output port (0-5 volts) automatically scaled to the target torque setting

    Adapts to any JETCO torque transducer (10 point calibration on new BigChip transducers)

    Adapts to third party torque transducers

    Reads JETCO legacy transducers (TTS-1000 transducers)Memory for up to 1000 torque values

    Software selectable filters for power tool testing (170Hz,500Hz,1500Hz,2500Hz,3600Hz)

    Rechargeable 9 volt battery with power adapter included (run meter while battery is charging)

    Auto reset for no hands operation, timed reset and manual reset also included.

    Automatic clockwise and counterclockwise operation

    USB port and cable comes standard for data transfer to a computer or printer.

    Recharge the internal 9volt battery directly from a computer or 110v transformer

    Wide LED light bar for visual Under-Within-Over signals (Yellow-Green-Red)

    Accuracy and calibration traceable to NIST for ISO requirements.

    Perfect for calibration labs and all testing and calibration of torque products

    10 point calibration can be carried out by any calibration lab with certified weights and arms (no need for special chip burning equipment)

bottom of page