TORQUE TRANSDUCERS
Torque transducers convert the physical torque value into an electronic signal that is read by the TTS-1000 torque meter. There are two basic types of transducers- bench mount and In-line extension style. JETCO offers both types of transducers with smart chips installed. Smart chips allow the TTS-1000 meter to automatically detect the range and calibration data associated with that particular transducer. This means that the transducers are truly "plug-and-play" meaning that the data is stored on the transducer and not in the meter. Any meter and any transducer can be swapped while maintaining accuracy:
Key Benefits
- Highly accurate strain gage technology
- Alloy tool steel
- Female square drive eliminates the need for adapters (Bench mount)
- Smart chips installed on every transducer
- Calibration traceable to NIST
- Shielded cable with quick change booted connector.
Bench
mount transducers are designed specifically to be used as a torque
standard used to calibrate and test torque tools such as hand type torque
wrenches and also power tools. These transducers are mounted to a bench with a
bracket and have a female square drive for the attachment of torque tools with
male square drives.
Accuracy is .5% or better.
`
Order part number BKT-4 for transducers up to 600 ft.lb.
| Part Number | Range | Drive | Standard Accuracy With TS-1000 |
| BMI-50 | 5-50 in.-lb. | 1/4" Female | .5% Indicated Value |
| BMI-100 | 10-100 in.-lb. | 1/4" Female | .5% Indicated Value |
| BMI-250 | 25-250 in.-lb. | 1/4" Female | .5% Indicated Value |
| BMF-50 | 5-50 ft.-lb. | 3/8" Female | .5% Indicated Value |
| BMF-100 | 10-100 ft.-lb. | 1/2" Female | .5% Indicated Value |
| BMF-250 | 25-250 ft.-lb. | 1/2" Female | .5% Indicated Value |
| BMF-500 | 50-500 ft.-lb | 3/4" Female | .5% Indicated Value |
| BMF-600 | 60-600 ft.-lb. | 3/4" Female | .5% Indicated Value |
| BMF-1000F | 10-1000 ft.-lb. | 1" Female | .5% Indicated Value |
| BMF-2000F | 20-2000 ft.-lb. | 1" Female | .5% Indicated Value |
In-line extension
transducers connect between a wrench and a socket and measure the torque that is applied to a fastener. This
versatile type of
transducer converts a hand held torque meter into a highly accurate digital
torque wrench. In-line transducers can also be used as a torque wrench
tester if they are
mounted to a fixture.
Accuracy is 1% or better.
| Part Number | Range | Drive OK to use drive reducers |
Length | Accuracy |
| IL-250I | 25-250 in.-lb | 3/8"Female to 3/8" Male | 2.6" | 1% Indicated Value |
| IL-50F | 5-50 ft.-lb. | 3/8"Female to 3/8" Male | 2.6" | 1% Indicated Value |
| IL-150F | 15-150 ft.-lb. | 1/2"Female to 1/2" Male | 3.3" | 1% Indicated Value |
| IL-250F | 25-250 ft.-lb. | 1/2"Female to 1/2" Male | 3.3" | 1% Indicated Value |