|
MECHANICAL DIAL TORQUE WRENCHES WITH NEW SECURE BEZEL DESIGN
 
JETCO mechanical dial type torque wrenches
are industrial quality, highly accurate and ergonomic. Our new secure bezel
design means no more broken/lost, damaged bezels.
Each wrench is supplied with a report of calibration traceable to NIST.
Our TORSION drives are produced to exacting standards and are made of the
highest grade alloy steel. All torque transferring components are steel. Each
wrench has an integral steel guard for dial protection.
Key Benefits
- 4% accuracy standard
- NEW Secure Bezel Design (no more lost/Broken Bezels
- Large no glare scale
- Dual scale means fewer wrenches are needed
- Ergonomic handle*
- Memory needle on every wrench
- Electric light and buzzer available on all models
- Add "-E" to any model to get signal and light version
- High Alloy TORSION drive design for non-length dependent application of
torque (accurate no matter where you press on the handle)
Operation Manual
Spare Parts Lists
Calibration Procedures
| Part Number |
Range |
Graduations |
Drive |
Length |
Case |
Weight |
Memory Needle |
|
| D1-30IN |
0-30in.lb.
0-3.5Nm |
.5in.-lb./
.1 Nm |
1/4" |
11" |
Plastic Blow Molded |
1.6Lb |
YES |
|
| D1-75IN |
0-75in.lb.
0-9 Nm |
1 in.-lb./
.2 Nm |
1/4" |
11" |
Plastic Blow Molded |
1.6Lb |
YES |
|
| D1-150IN |
0-150in.lb.
0-13Nm |
2in.-lb./
.5 Nm |
3/8" |
11" |
Plastic Blow Molded |
1.6Lb |
YES |
|
| D1-250IN |
0-250in.lb.
0-30Nm |
5in.-lb./
.5 Nm |
3/8" |
11" |
Plastic Blow Molded |
1.6Lb |
YES |
|
| D1-600IN |
0-600in.lb.
0-70Nm |
10 in.-lb./
2 Nm |
3/8" |
11" |
Plastic Blow Molded |
1.6Lb |
YES |
|
| D1-50F |
0-50 ft.lb.
0-70Nm |
1 ft.lb.
2 Nm |
3/8" |
11" |
Plastic Blow Molded |
1.6Lb |
YES |
|
| |
|
|
|
|
|
|
|
|
|
| |
|
| |
| Part Number |
Range |
Graduations |
Drive |
Length |
Case |
Weight
(Lb) |
Memory Needle |
|
| D3-175F |
0-175 ft.lb
0-250 Nm |
5 ft-lb.
5 Nm |
1/2" |
21.5" |
Plastic Blow Molded |
3.0 |
YES |
|
| D3-250F |
0-250 ft.lb
0-350 Nm |
5 ft-lb.
10 Nm |
1/2" |
21.5" |
Plastic Blow Molded |
3.0 |
YES |
|
| |
|
|
|
|
|
|
|
|
|
| |
 350F with dial
guard shown
Mine Roof Bolt Wrench shown with bezel guard
| Part Number |
Range |
Graduations |
Drive |
Length |
Case |
Weight |
Extension
Handle |
|
|
|
| D4-350F |
0-350 ft.lb
0-480Nm |
10 ft.lb.
10 Nm |
3/4" |
25.75" |
Plastic Blow Molded |
7 Lb |
optional |
|
|
|
| D4-600F |
0-600ft.lb.
0-800Nm |
10 ft.lb.
25Nm |
3/4" |
25.75"
48" (with extension) |
Plastic Blow Molded |
10 |
1 standard |
|
|
|
|
New DuraNeck design for added strength from bending
Signal Light and Buzzer when torque is reached (-E models). Power from (2) Cr2032
batteries
| Part Number |
Range |
Graduations |
Drive |
Length |
Case |
Weight |
Extension
Handle |
|
| 1000FD4 |
0-1000ft.lb.
0-1400 Nm |
20ft.lb.
25Nm |
1" |
77" |
Metal |
20 |
1 standard |
|
| |
|
|
|
|
|
|
|
|
| 1000FD4-E |
0-1000ft.lb.
0-1400 Nm |
20ft.lb.
25Nm |
1" |
77" |
Metal |
20 |
1 standard |
|
  Electric
| Part Number |
Range |
Graduations |
Drive |
Length |
Case |
Weight |
Extension
Handle |
|
| D5-2000F |
0-2000ft.lb.
0-2800Nm |
40ft.lb.
50Nm |
1" |
125" |
Foam/Crdbd |
46lb |
5 standard |
|
|
Pricing: Contact JETCO for details of Mechanical Dial Wrenches
*On wrenches below 250 ft.lb
| 
